Attention:

30 mins | $19.95

This consultation gives you the opportunity to walk us completely through the space while you give us a full understanding of everything you would like to improve. This (non-refundable) fee of $19.95 will be subtracted from the overall cost of the project should you choose to allow us to complete your project. *By booking a service on our website, you acknowledge and agree that you have read the contract at the top of this page. You furthermore certify that you accept full legally binding accountability for the terms listed in the contract.

* We reserve the right to request a larger consultation fee depending upon mileage. Here are some of our previous projects.

1 hr | $100

Please be sure that your mount will support the weight of the equipment. A flat mount is one that does not tilt, swivel, fold, turn or bend in any way. $75 for any tv under 50″ with flat mount. $95 for any tv over $50″ with flat mount. We recommend any mount from your local Walmart. Standard prices are as follows. $130 mount only. $200 mount and hide wires. $370 mount and install new outlet behind wall. Mount not included. Sheet rock repair (not included) may be needed after installation of new outlet. Prices shown are for drywall. If you have wood or brick the price will be adjusted accordingly. For an example of what to buy you may use this.

5 hrs | $175

Depending upon the size of the hole the price may be adjusted. The price may also be adjusted based on the type of paint needed. A small patch- a hole that is less than 1′ x 1′ with a flat paint will be $175 and a gloss paint will be $275 depending on the wall size. A medium patch- a hole that is less than 3’ x 3′ with a flat paint will be $375 and a gloss paint will be $475 depending on the wall size. A large patch- a hole that is less than 8′ x 4’ with a flat paint will be $550 and a gloss paint will be $650 depending on the wall size. These prices do not include the materials (mud or paint) however you will be provided with a receipt for the materials to be added in. Any texture on the drywall will be considered as paint.

1 hr | $25 | Please provide the approximate weight of the item. ($base – $125)

1 hr 30 mins | $107 | Depends on the item. ($base – $450)

4 hrs | $500

Depending upon the size of the door the price may be adjusted. The price may also be adjusted based on the type of door. Standard door and frame replacement without glass is $500 and with glass is $650. Wider doors will be dependent upon the size of the frame. Double or French door and frame replacement will be $800 without glass and $1000 with glass. Glass patio doors and frame will be $1200. Interior doors will usually be $400 with frame. Storm doors and screen doors will be $275. These prices do not include the materials (door) however you will be provided with a receipt for the materials to be added in.

1 hr | $35 | Please be sure that your equipment is compatible with the intended application. ($base – $150)

2 hrs | $47 | Please be sure that your equipment is compatible with the intended application. ($base – $325)

2 hrs | $68 | No large Main spring replacement – Recommended to contact the Manufacturer

3 hrs | $200

This is a custom category and will need to be verified in person. Prices are subject to change. If you can dream it, we can build it. Items include building cabinets, replacing deck boards, framing walls, installing attic stairs, and much more.

2 hrs | $34 | Please be sure that your equipment is compatible with the intended application. ($base – $200)

4 hrs | $275

Depending upon the size of the window the price may be adjusted. The price may also be adjusted based on the type of window. We recommend replacing the window rather than repairing the window. Newer windows are more efficient and will save more money on your HVAC bill. Standard single windows with frames are $275 if on the ground floor. If any ladder is necessary the price will be adjusted accordingly. Double windows with frames are $425 if on the ground floor. These prices do not include the materials (window or trim) however you will be provided with a receipt for the materials to be added in.

4 hrs | $200 | ($base – $4000) Price does not include hauling. Our hauling fee starts at $300.

4 hrs | $70 | Please be sure that your equipment is compatible with the intended application. ($base – $300)

8 hrs | $2,000

Do you have multiple projects that will take a full day? We can complete all your projects. Prices are subject to adjustment.

*By booking a service on our website, you acknowledge and agree that you have read the contract at the top of this page. You furthermore certify that you accept full legally binding accountability for the terms listed in the contract.*

2 hrs | $89 | Please be sure that your baseboards are clear and accessible. ($base – $325)

2 hrs | $86 | We come to you! Please provide vehicle details. Material costs are not included.

2 hrs | $54

Let’s first start by finding the problem and the best, most affordable solution. If we need to run wire the price will vary. ($base – $2500)

1 hr | $37 | Please provide the color of the component. ($base – $300)

2 hrs | $150

Please have compatible bulbs. ($base – $400) For ceilings higher than (standard) 8’ the price will be adjusted accordingly. Fans that are flush mounted will be an additional $50. Lights will be dependent upon the fixture.

2 hrs | $138

Please be sure that your equipment is compatible with the intended application. If we need to run wire the price will vary. ($base – $400)

5 hrs | $350

Please ensure your equipment is compatible with your vehicle. If we need to run wire the price will vary. ($base – $1700)

3 hrs | $339

Please provide an approximate weight of the component. If we need to run wire the price will vary. ($base – $700)

3 hrs | $175 | ($base – $500)

3 hrs | $319

Please provide an approximate weight of the component. Please have compatible light bulbs. If we need to run wire the price will vary. ($base – $500)

1 hr 30 mins | $69 | Please include the specs. on your dryer. ($base – $300)

4 hrs | $263 | Please be sure that your equipment is compatible with the intended application. ($base- $3000)

3 hrs | $370

Please be sure that your equipment is compatible with the intended application. If we need to run wire the price will vary. ($base – $700)

5 hrs | $385 | Please be sure that your equipment is compatible with the intended application. ($base – $1500)

4 hrs | $265

Please be sure that your equipment is compatible with the intended application. If we need to run wire the price will vary. ($base – $1500)

4 hrs | $282 | Please be sure that your equipment is compatible with the intended application. ($base – $1500)

4 hrs | $444

Please be sure that your equipment is compatible with the intended application. If we need to run wire the price will vary. ($base – $800)

3 hrs | $184

Please be sure that your equipment is compatible with the intended application. If we need to run wire the price will vary. ($base – $500)

2 hrs | $85 | Please be sure that your equipment is compatible with the intended application. ($base – $300)

3 hrs | $250 | Please be sure that your equipment is compatible with the intended application. ($base – $700)

8 hrs | $2,700

Please be sure that your equipment is compatible with the intended application. ($base – $6000)

2 hrs | $90
($base – $300) *We do NOT clear clogs*

2 hrs | $135
($base – $400)

3 hrs | $181
($base – $400)

3 hrs 30 mins | $197
($base – $700) Most single vanities will be $300

2 hrs | $72
($base – $250)

2 hrs | $125
($base – $300)

3 hrs | $165
($base – $450)

4 hrs | $335
($base – $826) gas will be $50 more. Price depends on accessibility.

3 hrs | $321
($base – $620) Sheetrock repair may be needed but is not included in price.

2 hrs | $123
($base – $300)

2 hrs | $48
($base – $300)

3 hrs | $101
May require export of material. Please perform a magnet test on the material. Does the magnet stick to it or not? ($base – $300)

5 hrs | $344
Please be sure that your equipment is compatible with the intended application. ($base – $843)

4 hrs | $300
Please be sure that your equipment is compatible with the intended application. ($base – $2500) Here are a few of our previous welding projects. If you see something that you like, let us know so we can build your design.

8 hrs | $1,833
($base – $5250) New AC unit Installation

8 hrs | $1,976
($base – $3687)

1 hr | $88
($base – $677)

2 hrs | $165
Keep it running properly. ($base – $450)

4 hrs | $180
($base – $489) we replace the duct. We do not clean the duct.

2 hrs | $82
Please be sure that your equipment is compatible with the intended application. ($base – $300)